One thing you don’t want is a faulty outdoor sound system that keeps you running up and down. Adding your speakers into your pool, patio, or backyard requires attention, not to mess up with your system. Here we shed some light on the entire process that will make the set up easier than you think.
Establish the Control
Having an outdoor sound system requires a centralized control point accessible from the farthest point. Controlling your system will depend on the medium you use and the flexibility it offers, given that there may be numerous obstructions to tune up the amp, which might be enclosed or indoors.
The control box should be the focal point of all the external wires from the infinity cable products which receive wireless control such as Bluetooth. When setting up the equipment and establishing your control, you should ensure that you maintain the control at most angles, if not all, for ultimate experience and fun. Once you establish the most suitable control point, you can now start on the wiring and get ready to dance.
Setting up the Equipment
The most challenging aspect of wiring up your outdoor sound system is establishing the power source, especially if you lack the appropriate wire. Notably, most receivers and amps are not designed to withstand extreme weather, so you must keep them covered and dry.
If you have a multi-zone receiver, you can have the music playing both outdoors and indoors. Ensure you have all the connection and the cutting tools with the right wire measurements to reach varying distances depending on the area you want to cover.
Also, establish the sound quality of your speakers not to be too noisy for your small compound. The sound system should be clear in your compound, so you should have enough of them for quality sound and music.
Use Infinity Cable Products For Wiring.
The wiring process should be done professionally to ensure no short circuits or confusion that could damage your receiver or amp. Besides, having poor sound system wiring could affect your speakers and affect the sound quality. Therefore, it is important to incorporate the infinity cable products long enough to reach all your established speaker points.
Remember to use the right wire –gauge, or your sound quality will suffer. You should use the 14 to 12 gauge wires as the 16 gauge is only suitable for short distances not exceeding 24 meters (80ft) for longer distances.
Avoid running the wires through door or window jambs to get crimped and affect the sound quality. However, if you have wireless speaker systems, you don’t worry about wiring as you can use wireless applications such as Bluetooth. However, these applications have a distant range of around 150 feet without other factors impeding the signal.
Now you are sure to enjoy your outdoor sound system as long as you followed the correct steps and used the right appliances. Keep a close eye on every part of the system to ensure everything is running smoothly.
