The majority of people don’t even imagine the importance of electrical connectors. Honestly, most people don’t even have an idea of what a connector is. However, they are used in many appliances and devices that are operated in our daily activities. Your car is a good example of a complex system where connectors help to interconnect the battery with other components. The automotive industry is one of the biggest consumers of electrical connectors.
The most common type of connector is the so-called crimp connector. This is used as a terminal at the end side of a wire or cable. The advantage of using a crimp connector is that soldering is not needed. Instead, the connectors are attached to the cable using wire crimping tools, which can be bought at wirefyshop.com/collections/wire-crimping-tools.
There are different types of connectors (spade, barbed, ferrule, etc.). They also come in different sizes, from small gauge wire connectors to connectors that fit cables as thick as a rope. Equally important is the crimping tool used to join the wire/cable and the connector together. You can buy high-quality crimping tools at WirefyShop.com, a vendor that specializes in electrical connectors.
How You Use a Crimping Tool
One of the most heated discussions in the industry is whether soldering or crimping is the best solution. The answer depends on the type of application. However, crimping cables is in general much easier and faster than soldering. It is also more convenient. For example, if you need to change a spark plug in a vintage car, the operation is easier if the cables are not soldered. For safety reasons, crimping is preferred in most cases.
Hence, any technician must be familiar with the use of wire crimpers. These tools can be purchased at WirefyShop.com. The crimping process is not difficult. However, some practice is needed to make good connections. The most important thing to remember when crimping is to avoid damaging the insulation of the cable. So, the way to proceed is as follows:
● Remove the insulation of the cable. Make sure you don’t cut a strand of the cable;
● Place the wire on the cable crimping tool. Verify that the cable is properly centered;
● Apply pressure through the handles of the tool. Avoid over-crimping;
● To seal the connection, you can use heat shrink tubing;
● Test the connection by tugging the connector. You should also bend the cable. Inspect the ferrules if needed.
As seen, the crimping tool is very important to successfully crimp connectors. Don’t compromise when you buy a crimping tool. Get the best one that you can afford. The best crimping tools are made of stainless steel. You can buy crimping tools from general hardware stores and home centers like Menards. But why risk not finding the right crimping tool for your specific application? Instead, buy online from WirefyShop.com. This retailer sells the best crimping tools that you can find in the market.
