Keeping your enamel pins on is key to looking sharp and representing your brand or cause. It can be a little tricky, but with the right methods and products, you can keep those pins in place and looking good.
In this blog post, we’ll give you tips on how to do just that. Read on for the secrets to success!
Tips to Ensure Your Enamel Pins Stay Put
By following a few simple tips, you can make sure your enamel pins stay affixed to your clothing or bag for as long as you’d like.
Choose the right pins and backings
Start by looking for pins that have a flat back, rather than a round one. This will help to prevent the pin from spinning and eventually falling off.
Next, choose a backing that is made of metal or hard plastic. Rubber backings may be more comfortable, but they won’t do a good job of keeping the pin in place.
Finally, make sure the pin is securely fastened to the backing. A simple way to do this is to bend the end of the pin over the edge of the backing.
Use a strong adhesive
It is important to use a strong adhesive so that your pins will not fall off. The most common type of adhesive is glue, but you can also use tape or magnets.
If you are using glue, be sure to apply it evenly and allow it to dry completely before attaching your pin.
If you are using tape, be sure to press the tape firmly onto the back of the pin and then trim away any excess. Magnets are a great option for people who do not want to damage their clothing or other fabrics.
Simply attach the magnet to the back of the pin and then place it on your clothing. The magnet will hold the pin in place without damaging the fabric.
Pin in the correct place
It’s also important to make sure you’re pinning the enamel pin in the correct place. The best places to put pins are on thicker fabric like jackets or backpacks.
You should also try to avoid putting them on areas of clothing that will rub up against skin or other objects frequently, as this can cause the pin to fall off.
Once you’ve found the perfect spot for your pin, be sure to secure it in place by using a piece of tape or another adhesive backing.
Additional Accessories to Keep them in Place
You can also use a few additional accessories to keep your enamel pins in place.
First, consider using a backing board. This will provide extra support for your pins and help to keep them in place. You can also purchase special holders that allow you to display your pins without fear of them falling off.
In addition, you can consider investing in pinbacks. Pinbacks are small metal discs that adhere to the back of the pin and help to secure it in place.
Be Careful When Removing Pins
How you remove your enamel pins can also affect how well they stay in place. If you’re not careful enough they may become loose.
To avoid this, be sure to hold onto the pin firmly with one hand while you remove it with the other. You may also want to use a pair of pliers to help remove the pin.
Store pins properly
Finally, make sure you store them properly. Pins should be stored in a dry, dark place where they won’t be jostled around, or they might become loose and fall.
A pin holder or a jewelry box with compartments is ideal. You can also put your pins in a small zip-top bag before storing them.
With a little bit of care, you can make sure your enamel pins stay affixed to your clothing or bag for as long as you’d like.
Types of Enamel Pins That are Less Likely to Fall
With so many different types of pins on the market, it can be hard to know which ones are the most sturdy and unlikely to fall off. Here are a few of the best options:
Butterfly clutch: This type of backing is one of the most secure, as it features a metal clip that attaches to the back of the pin and locks into place.
The downside is that this type of backing can be more difficult to remove, so it’s not ideal if you plan on switching out your pins often.
Rubber clutch: A rubber clutch is also a very secure option, as it grips the back of the pin tightly. However, like the butterfly clutch, it can be difficult to remove.
Magnetic backing: A magnet is another secure option for an enamel pin, and it has the added benefit of being easy to remove and swap out.
However, magnets can sometimes cause interference with electronic devices, so keep that in mind if you plan on wearing your pins near computers or other sensitive equipment.
Where to Buy the Enamel Pins That Won’t Fall
There are a lot of different places where you can buy enamel pins. Most people will buy them online. while others opt for physical stores. Here are some of the best places to buy enamel pins:
1. Amazon: Amazon is one of the largest online retailers in the world, and they have a huge selection of enamel pins. You can find almost any type of pin on Amazon, and the prices are usually very reasonable.
2. Etsy: Etsy is an online marketplace for handmade goods, and many sellers offer enamel pins. The prices on Etsy vary widely, but you can often find good deals on unique pins.
3. Local craft stores: Many local craft stores sell enamel pins, especially if they cater to an alternative or punk rock crowd. The prices at these stores tend to be higher than in other places, but you can often find some unique designs.
4. Online specialty retailers: There are a few online retailers that specialize in selling enamel pins. These stores usually have a small selection, but the prices are typically higher than in other places.
Wrap Up
So, there you have it! Everything you need to know in order to make enamel pins stay on.
If you have any questions or would like some advice on how to get started, please don’t hesitate to reach out to us. We’d be more than happy to help. Thanks for reading!